MS21919-WCE-07 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21919-WCE-07: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER ETHYLENE-PROPYLENE CLASS EPM CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: COLOR IS PURPLE, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-553-7104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21919-WCE-07

NSN: 5340-01-553-7104
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	RUBBER ETHYLENE-PROPYLENE CLASS EPM CUSHION
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features	COLOR IS PURPLE
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
cushioning_environmental_protection	HYDRAULIC FLUID AND OZONE RESISTANT
distance_from_loop_center_to_tongue_end	0.826 INCHES MINIMUM AND 0.856 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.608 INCHES MINIMUM AND 0.638 INCHES MAXIMUM IN
NSN	5340-01-553-7104

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: HYDRAULIC FLUID AND OZONE RESISTANT

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.826 INCHES MINIMUM AND 0.856 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	HYDRAULIC FLUID AND OZONE RESISTANT
STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.826 INCHES MINIMUM AND 0.856 INCHES MAXIMUM IN
SPECIAL FEATURES	COLOR IS PURPLE
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.608 INCHES MINIMUM AND 0.638 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND

SUBSTITUTES & CROSS-REFERENCES 2

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS21919WCE07Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS21919-WCE-07?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21919-WCE-07?

MS21919-WCE-07 is a CLAMP,LOOP.

What parts can replace MS21919-WCE-07?

There are 2 known substitutes for MS21919-WCE-07: SAE-AS21919, AS21919WCE07. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21919-WCE-07?

MS21919-WCE-07 is cataloged in the U.S. Government catalog under NSN 5340-01-553-7104. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21919-WCE-07 — CLAMP,LOOP

Request a Quote — MS21919-WCE-07