MS21919-13 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21919-13: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-200-6535, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21919-13

NSN: 5340-00-200-6535
FSC: 5340 — Hardware, Commercial
CAGE: F3341 — HELLERMANNTYTON (FRA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	RUBBER CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.050 INCHES NOMINAL IN
loop_inside_diameter	0.813 INCHES NOMINAL IN
material_document_and_classification	QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.095 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.877 INCHES NOMINAL IN
NSN	5340-00-200-6535

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.095 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.877 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.095 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.877 INCHES NOMINAL IN
MATERIAL	RUBBER CUSHION
MATERIAL	ALUMINUM ALLOY 2024 BAND

SUBSTITUTES & CROSS-REFERENCES 5

MS21919DG13Reference document

Same NSN cross-reference

Reference document — Secondary reference

5340PL0802759Reference document

Same NSN cross-reference

Reference document — Informative reference only

AN742D15CReference document

Same NSN cross-reference

Reference document — Secondary reference

Z00.N7141060139Reference document

Same NSN cross-reference

Reference document — Secondary reference

8046Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MS21919-13?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21919-13?

MS21919-13 is a CLAMP,LOOP.

What parts can replace MS21919-13?

There are 5 known substitutes for MS21919-13: MS21919DG13, 5340PL0802759, AN742D15C and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21919-13?

MS21919-13 is cataloged in the U.S. Government catalog under NSN 5340-00-200-6535. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21919-13 — CLAMP,LOOP

Request a Quote — MS21919-13