PartsTable
Technical Data Sheet
Download PDF

MS21905J5 — TEE,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS21905J5: TEE,TUBE.

The TEE,TUBE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, leg_length: 0.938 INCHES NOMINAL ALL ENDS IN, seat_angle: 12.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARELESS (TUBE) ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-684-0132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21905J5
NSN: 4730-00-684-0132
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
leg_length0.938 INCHES NOMINAL ALL ENDS IN
seat_angle12.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARELESS (TUBE) ALL ENDS
surface_treatmentPASSIVATE OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.500 INCHES ALL ENDS IN
maximum_operating_temp135.0 CELSIUS SINGLE RESPONSE DEGC
media_for_which_designedFLUID SINGLE RESPONSE
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
NSN4730-00-684-0132
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS21905J5 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CONNECTION STYLE: FLARELESS (TUBE) ALL ENDS
•
CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.312 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
LEG LENGTH: 0.938 INCHES NOMINAL ALL ENDS IN
•
NOMINAL THREAD SIZE: 0.500 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CONNECTION STYLEFLARELESS (TUBE) ALL ENDS
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.312 INCHES ALL ENDS IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
LEG LENGTH0.938 INCHES NOMINAL ALL ENDS IN
NOMINAL THREAD SIZE0.500 INCHES ALL ENDS IN
SEAT ANGLE12.0 DEGREES ALL ENDS
MAXIMUM OPERATING TEMP135.0 CELSIUS SINGLE RESPONSE DEGC
SUBSTITUTES & CROSS-REFERENCES 3
AS21905J5Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AS18280Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS21905-5CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS21905J5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21905J5?
MS21905J5 is a TEE,TUBE.
What parts can replace MS21905J5?
There are 3 known substitutes for MS21905J5: AS21905J5, SAE-AS18280, MS21905-5C. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21905J5?
MS21905J5 is cataloged in the U.S. Government catalog under NSN 4730-00-684-0132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21905J5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.