PartsTable
Technical Data Sheet
Download PDF

MS21904W16 — INJECTOR ASSEMBLY,FUEL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MS21904W16: INJECTOR ASSEMBLY,FUEL.

The INJECTOR ASSEMBLY,FUEL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, flow_angle: 90.0 DEGREES, leg_length: 1.719 INCHES MINIMUM AND 1.766 INCHES MAXIMUM ALL ENDS IN, seat_angle: 12.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-640-5094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21904W16
NSN: 4730-00-640-5094
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
flow_angle90.0 DEGREES
leg_length1.719 INCHES MINIMUM AND 1.766 INCHES MAXIMUM ALL ENDS IN
seat_angle12.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
special_featuresINLET RH SIDE; MADE OF ALUMINUM ALLOY 7075
surface_treatmentANODIZE OVERALL
nominal_thread_size1.312 INCHES ALL ENDS IN
thread_quantity_per_inch12 ALL ENDS
thread_series_designatorUNIFIED NATIONAL JOINT (UNJ) ALL ENDS
specification/standard_data81343-SAE AS21904 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN4730-00-640-5094
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MS21904W16 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 1.000 INCHES ALL ENDS IN
•
LEG LENGTH: 1.719 INCHES MINIMUM AND 1.766 INCHES MAXIMUM ALL ENDS IN
•
NOMINAL THREAD SIZE: 1.312 INCHES ALL ENDS IN
•
SEAT ANGLE: 12.0 DEGREES ALL ENDS
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED1.000 INCHES ALL ENDS IN
LEG LENGTH1.719 INCHES MINIMUM AND 1.766 INCHES MAXIMUM ALL ENDS IN
LEG LENGTH1.719 INCHES NOMINAL INLET IN
NOMINAL THREAD SIZE1.312 INCHES ALL ENDS IN
SEAT ANGLE12.0 DEGREES ALL ENDS
SPECIFICATION/STANDARD DATA81343-SAE AS21904 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESINLET RH SIDE; MADE OF ALUMINUM ALLOY 7075
SUBSTITUTES & CROSS-REFERENCES 5
AS21904Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS18280Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
ER821D16Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS21904D16Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS18280Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS21904W16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21904W16?
MS21904W16 is a INJECTOR ASSEMBLY,FUEL.
What parts can replace MS21904W16?
There are 5 known substitutes for MS21904W16: AS21904, SAE-AS18280, ER821D16 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21904W16?
MS21904W16 is cataloged in the U.S. Government catalog under NSN 4730-00-640-5094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21904W16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.