MS21384-04 — MS21384-04

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MS21384-04: MS21384-04.

The MS21384-04 is a the manufacturer industrial component. Key specifications include inside_width: 0.222 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, overall_depth: 0.500 INCHES NOMINAL IN, pointer_design: NONDETACHABLE, inside_diameter: 0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN, outside_diameter: 1.000 INCHES NOMINAL IN, screw_drive_type: HEXAGON SOCKET. This part is cataloged in the U.S.

Government catalog under NSN 5355-01-016-7892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21384-04

NSN: 5355-01-016-7892
FSC: 5355 — Knobs and Pointers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

inside_width	0.222 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
overall_depth	0.500 INCHES NOMINAL IN
pointer_design	NONDETACHABLE
inside_diameter	0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
outside_diameter	1.000 INCHES NOMINAL IN
screw_drive_type	HEXAGON SOCKET
special_features	0.380 IN. COUNTERBORE DIAMETER,0.160 IN. COUNTERBORE DEPTH IN
style_designator	ROUND WITH SINGLE POINTED BAR FACE
attachment_method	SETSCREWS
overall_thickness	0.620 INCHES NOMINAL IN
reference_marking	INDEX LINE
nominal_thread_size	0.164 INCHES SCREW HOLE IN
NSN	5355-01-016-7892

COMPONENT DIAGRAM

KEY FEATURES

•

DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE: 0.310 INCHES NOMINAL IN

•

INSIDE WIDTH: 0.222 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN

•

SHAFT ACCOMMODATION STYLE: FLATTED ONE SIDE

•

OVERALL THICKNESS: 0.620 INCHES NOMINAL IN

•

STYLE DESIGNATOR: ROUND WITH SINGLE POINTED BAR FACE

•

OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN

•

REFERENCE MARKING: INDEX LINE

•

SETSCREW HOLE QUANTITY: 2

TECHNICAL CHARACTERISTICS

DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE	0.310 INCHES NOMINAL IN
INSIDE WIDTH	0.222 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
SHAFT ACCOMMODATION STYLE	FLATTED ONE SIDE
OVERALL THICKNESS	0.620 INCHES NOMINAL IN
STYLE DESIGNATOR	ROUND WITH SINGLE POINTED BAR FACE
OUTSIDE DIAMETER	1.000 INCHES NOMINAL IN
REFERENCE MARKING	INDEX LINE
SETSCREW HOLE QUANTITY	2
NOMINAL THREAD SIZE	0.164 INCHES SCREW HOLE IN
SPECIFICATION/STANDARD DATA	96906-MS21384 GOVERNMENT STANDARD

SUBSTITUTES & CROSS-REFERENCES 5

539-100-49Reference document

Same NSN cross-reference

Reference document — Secondary reference

NASM21384Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MIL-K-25049Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS21384Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS21384-04ANNReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS21384-04?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21384-04?

MS21384-04 is a MS21384-04.

What parts can replace MS21384-04?

There are 5 known substitutes for MS21384-04: 539-100-49, NASM21384, MIL-K-25049 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21384-04?

MS21384-04 is cataloged in the U.S. Government catalog under NSN 5355-01-016-7892. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21384-04 — MS21384-04

Request a Quote — MS21384-04