PartsTable
Technical Data Sheet
Download PDF

MS21299-C3 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS21299-C3: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.191 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM, recess_diameter: 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN, outside_diameter: 0.377 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-121-8526, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21299-C3
NSN: 5310-01-121-8526
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.191 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
recess_diameter0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
outside_diameter0.377 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
style_designatorRECESSED
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.067 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-121-8526
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS21299-C3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.377 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.067 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORRECESSED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.377 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
MATERIAL THICKNESS0.067 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
RECESS DIAMETER0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL COMP 4130 OVERALL
HOLE DIAMETER0.191 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
10109387Reference document
Same NSN cross-reference
Reference document — Informative reference only
5310PL2130424Reference document
Same NSN cross-reference
Reference document — Informative reference only
721009663500Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS21299-C3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21299-C3?
MS21299-C3 is a WASHER,RECESSED.
What parts can replace MS21299-C3?
There are 3 known substitutes for MS21299-C3: 10109387, 5310PL2130424, 721009663500. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21299-C3?
MS21299-C3 is cataloged in the U.S. Government catalog under NSN 5310-01-121-8526. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21299-C3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.