PartsTable
Technical Data Sheet
Download PDF

MS21289-12 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS21289-12: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, hole_type: DRILLED, head_style: DOUBLE HEXAGON W/HOLE, head_height: 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN, thread_class: 3A A, hole_diameter: 0.070 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-357-2069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21289-12
NSN: 5306-00-357-2069
FSC: 5306 — Bolts
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
hole_typeDRILLED
head_styleDOUBLE HEXAGON W/HOLE
head_height0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
thread_class3A A
hole_diameter0.070 INCHES NOMINAL IN
hole_quantity4
thread_length0.740 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES GRIP
fastener_length0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
hardness_rating24.0 ROCKWELL C MINIMUM AND 28.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5306-00-357-2069
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS21289-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
EXTENDED WASHER THICKNESS: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
EXTENDED WASHER DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
EXTENDED WASHER THICKNESS0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
HEAD HEIGHT0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
FASTENER LENGTH0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
EXTENDED WASHER DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
THREAD LENGTH0.740 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
HARDNESS RATING24.0 ROCKWELL C MINIMUM AND 28.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEDOUBLE HEXAGON LONGITUDINAL HOLE
SUBSTITUTES & CROSS-REFERENCES 1
490315Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS21289-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21289-12?
MS21289-12 is a BOLT,MACHINE.
What parts can replace MS21289-12?
There is 1 known substitute for MS21289-12: 490315. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21289-12?
MS21289-12 is cataloged in the U.S. Government catalog under NSN 5306-00-357-2069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21289-12