PartsTable
Technical Data Sheet
Download PDF

MS21250H0410 — BOLT,SHEAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS21250H0410: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL, head_style: DOUBLE HEXAGON W/HOLE, grip_length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, head_height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-242-4267, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21250H0410
NSN: 5306-01-242-4267
FSC: 5306 — Bolts
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
head_styleDOUBLE HEXAGON W/HOLE
grip_length0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
head_height0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
hole_diameter0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
thread_length0.421 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN
fastener_length1.127 INCHES MINIMUM AND 1.147 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5306-01-242-4267
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS21250H0410 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.127 INCHES MINIMUM AND 1.147 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED WASHER DIAMETER: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.421 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
HOLE CONFIGURATION STYLE: DOUBLE HEXAGON LONGITUDINAL HOLE
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
HEAD HEIGHT0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
FASTENER LENGTH1.127 INCHES MINIMUM AND 1.147 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED WASHER DIAMETER0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD LENGTH0.421 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEDOUBLE HEXAGON LONGITUDINAL HOLE
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEDOUBLE HEXAGON W/HOLE
SUBSTITUTES & CROSS-REFERENCES 1
NASM8831Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS21250H0410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21250H0410?
MS21250H0410 is a BOLT,SHEAR.
What parts can replace MS21250H0410?
There is 1 known substitute for MS21250H0410: NASM8831. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21250H0410?
MS21250H0410 is cataloged in the U.S. Government catalog under NSN 5306-01-242-4267. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21250H0410

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.