PartsTable
Technical Data Sheet
Download PDF

MS21134-04007 — BOLT,SHEAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS21134-04007: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL, head_style: SPLINE EXTENDED WASHER, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, head_height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-313-1764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21134-04007
NSN: 5306-01-313-1764
FSC: 5306 — Bolts
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
head_styleSPLINE EXTENDED WASHER
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
head_height0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
thread_length0.445 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES BEARING SURFACE OF HEAD
fastener_length0.893 INCHES MINIMUM AND 0.923 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5306-01-313-1764
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS21134-04007 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.893 INCHES MINIMUM AND 0.923 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-416 TY 2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.445 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
EXTENDED WASHER THICKNESS0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
HEAD HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FASTENER LENGTH0.893 INCHES MINIMUM AND 0.923 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-416 TY 2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED WASHER DIAMETER0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
THREAD LENGTH0.445 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 2
NASM8831Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM21134Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21134-04007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21134-04007?
MS21134-04007 is a BOLT,SHEAR.
What parts can replace MS21134-04007?
There are 2 known substitutes for MS21134-04007: NASM8831, NASM21134. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21134-04007?
MS21134-04007 is cataloged in the U.S. Government catalog under NSN 5306-01-313-1764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21134-04007

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.