PartsTable
Technical Data Sheet
Download PDF

MS21104WD32 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS21104WD32: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-528-0571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21104WD32
NSN: 5340-01-528-0571
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_diameter0.125 INCHES NOMINAL IN
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter2.000 INCHES NOMINAL IN
end_item_identificationNH-2/H-60
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.694 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.475 INCHES NOMINAL IN
NSN5340-01-528-0571
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21104WD32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.694 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.125 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-85052/1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.694 INCHES NOMINAL IN
END ITEM IDENTIFICATIONNH-2/H-60
TONGUE HOLE TYPEROUND, UNTHREADED
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS21919Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS21919WDF32Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21104WD32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21104WD32?
MS21104WD32 is a CLAMP,LOOP.
What parts can replace MS21104WD32?
There are 2 known substitutes for MS21104WD32: SAE-AS21919, AS21919WDF32. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21104WD32?
MS21104WD32 is cataloged in the U.S. Government catalog under NSN 5340-01-528-0571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21104WD32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.