PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21103D5
MS21103D5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-526-2381, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21103D5
NSN: 5340-00-526-2381
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN
loop_inside_diameter0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5TEMPER0 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.686 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.498 INCHES NOMINAL IN
NSN5340-00-526-2381
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21103D5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5TEMPER0 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.498 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.686 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5TEMPER0 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALALUMINUM ALLOY 2024 BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.498 INCHES NOMINAL IN
MATERIAL THICKNESS0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.686 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
MS21103Interchangeable
interchangeable cross-reference
interchangeable
MS21103-7Interchangeable
interchangeable cross-reference
interchangeable
MS21103-12Interchangeable
interchangeable cross-reference
interchangeable
MS21103-28Interchangeable
interchangeable cross-reference
interchangeable
5340PL0727323Interchangeable
interchangeable cross-reference
interchangeable
5340001863389Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21103D5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21103D5?
MS21103D5 is a CLAMP,LOOP.
What parts can replace MS21103D5?
There are 19 known substitutes for MS21103D5: MS21103, MS21103-7, MS21103-12 and 16 more. Substitute compatibility should be verified for your specific system.
Is MS21103D5 still available?
MS21103D5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21103D5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026