PartsTable
Technical Data Sheet
Download PDF

MS21083N14 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS21083N14: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON LOCKING INSERT, nut_style: HEXAGON, nut_height: 0.485 INCHES MAXIMUM IN, lubrication: SOLUBLE LUBRICANT, temp_rating: 250.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-942-5183, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21083N14
NSN: 5310-00-942-5183
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON LOCKING INSERT
nut_styleHEXAGON
nut_height0.485 INCHES MAXIMUM IN
lubricationSOLUBLE LUBRICANT
temp_rating250.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
hardness_rating35.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
countersink_angle88.0 DEGREES MINIMUM NUT
surface_treatmentCADMIUM AND CHROMATE OVERALL EXCEPT INSERT
NSN5310-00-942-5183
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS21083N14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: SOLUBLE LUBRICANT
•
WIDTH ACROSS FLATS: 1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL EXCEPT INSERT
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 250.0 FAHRENHEIT MAXIMUM DEGF
•
HARDNESS RATING: 35.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
LUBRICATIONSOLUBLE LUBRICANT
WIDTH ACROSS FLATS1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL EXCEPT INSERT
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING250.0 FAHRENHEIT MAXIMUM DEGF
HARDNESS RATING35.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
SUBSTITUTES & CROSS-REFERENCES 7
MS20364-1414Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
F52NTE-144Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM25027Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5310009425183Reference document
Same NSN cross-reference
Reference document — Secondary reference
52NTE-144Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
201931Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21083N14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21083N14?
MS21083N14 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace MS21083N14?
There are 7 known substitutes for MS21083N14: MS20364-1414, F52NTE-144, NASM25027 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21083N14?
MS21083N14 is cataloged in the U.S. Government catalog under NSN 5310-00-942-5183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21083N14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.