PartsTable
Technical Data Sheet
Download PDF

MS21077-08 — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS21077-08: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON LOCKING INSERT, nut_style: PLATE, nut_height: 0.234 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, nut_length: 0.984 INCHES MAXIMUM IN, plate_width: 0.328 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-728-3469, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21077-08
NSN: 5310-00-728-3469
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON LOCKING INSERT
nut_stylePLATE
nut_height0.234 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
nut_length0.984 INCHES MAXIMUM IN
plate_width0.328 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNJC
hardness_rating36.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
plate_thickness0.075 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
NSN5310-00-728-3469
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS21077-08 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.075 INCHES MAXIMUM IN
•
NUT LENGTH: 0.984 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT
•
THREAD SERIES: UNJC
•
PLATE WIDTH: 0.328 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
HARDNESS RATING: 36.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.075 INCHES MAXIMUM IN
NUT LENGTH0.984 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT
THREAD SERIESUNJC
PLATE WIDTH0.328 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
HARDNESS RATING36.0 ROCKWELL C MAXIMUM
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
FEATURES PROVIDEDFLOATING NUT
SUBSTITUTES & CROSS-REFERENCES 2
SNLA-069-08Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1819512-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21077-08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21077-08?
MS21077-08 is a NUT,SELF-LOCKING,PLATE.
What parts can replace MS21077-08?
There are 2 known substitutes for MS21077-08: SNLA-069-08, 1819512-1. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21077-08?
MS21077-08 is cataloged in the U.S. Government catalog under NSN 5310-00-728-3469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21077-08

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.