PartsTable
Technical Data Sheet
Download PDF

MS21044D8 — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MS21044D8: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 NUT, nut_style: HEXAGON, nut_height: 0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, body_length: 0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, lubrication: SOLUBLE LUBRICANT, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-282-7848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MS21044D8
NSN: 5310-00-282-7848
NIINs: 002827848, 012827848
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 NUT
nut_styleHEXAGON
nut_height0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
body_length0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
lubricationSOLUBLE LUBRICANT
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNF
inclosure_typeENCASED
overall_length0.758 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
style_designatorROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
NSN5310-00-282-7848
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS21044D8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: SOLUBLE LUBRICANT
•
WIDTH ACROSS FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT
•
THREAD SERIES: UNF
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/2,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/5,T4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6,T6 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-200/11,T6 FED SPEC 4TH MATERIAL RESPONSE NUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
LUBRICATIONSOLUBLE LUBRICANT
WIDTH ACROSS FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT
THREAD SERIESUNF
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/5,T4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6,T6 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-200/11,T6 FED SPEC 4TH MATERIAL RESPONSE NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
COUNTERBORE DIAMETER0.511 INCHES MINIMUM AND 0.551 INCHES MAXIMUM NUT IN
SUBSTITUTES & CROSS-REFERENCES 4
68NE-080Reference document
Same NSN cross-reference
Reference document — Secondary reference
ANN5Reference document
Same NSN cross-reference
Reference document — Identification reference
AN365D820ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CV187384Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21044D8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21044D8?
MS21044D8 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace MS21044D8?
There are 4 known substitutes for MS21044D8: 68NE-080, ANN5, AN365D820A and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21044D8?
MS21044D8 is cataloged in the U.S. Government catalog under NSN 5310-00-282-7848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21044D8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.