MS20427M3-2: RIVET,SOLID.
The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OR NICKEL ALLOY R-405 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), shank_style: STRAIGHT, heat_treatment: ANNEALED OVERALL, shank_diameter: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, shear_strength: 49000 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-006-5036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | NICKEL ALLOY 400 OR NICKEL ALLOY R-405 OVERALL |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| shank_style | STRAIGHT |
| heat_treatment | ANNEALED OVERALL |
| shank_diameter | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| shear_strength | 49000 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| countersink_angle | 98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM |
| head_major_diameter | 0.155 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| material_document_and_classification | QQ-N-281 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| NSN | 5320-01-006-5036 |
| SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| HEAT TREATMENT | ANNEALED OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK STYLE | STRAIGHT |
| COUNTERSINK ANGLE | 98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM |
| SHEAR STRENGTH | 49000 SINGLE POUNDS PER SQUARE INCH |
| MATERIAL | NICKEL ALLOY 400 OR NICKEL ALLOY R-405 OVERALL |
| HEAD MAJOR DIAMETER | 0.155 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.