MS20426B5-9 — RIVET,SOLID

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MS20426B5-9: RIVET,SOLID.

The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5056 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), shank_style: COUNTERSUNK (UNDRILLED), shank_diameter: 0.156 INCHES NOMINAL IN, fastener_length: 0.562 INCHES NOMINAL IN, countersink_angle: 100.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-233-4760, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS20426B5-9

NSN: 5320-00-233-4760
NIINs: 002334760, 015045179
FSC: 5320 — Rivets
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 5056 OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
shank_style	COUNTERSUNK (UNDRILLED)
shank_diameter	0.156 INCHES NOMINAL IN
fastener_length	0.562 INCHES NOMINAL IN
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.278 INCHES NOMINAL IN
NSN	5320-00-233-4760

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN

•

SHANK STYLE: STRAIGHT W/RADIUS CHAMFERED TIP

•

SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
FASTENER LENGTH	0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
SHANK STYLE	STRAIGHT W/RADIUS CHAMFERED TIP
SURFACE TREATMENT	ANODIZE OR OXIDE FILM OVERALL
COUNTERSINK ANGLE	99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
SHEAR STRENGTH	24000 SINGLE POUNDS PER SQUARE INCH

SUBSTITUTES & CROSS-REFERENCES 2

10123541Reference document

Same NSN cross-reference

Reference document — Informative reference only

AN426B5-9Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS20426B5-9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS20426B5-9?

MS20426B5-9 is a RIVET,SOLID.

What parts can replace MS20426B5-9?

There are 2 known substitutes for MS20426B5-9: 10123541, AN426B5-9. Substitute compatibility should be verified for your specific system.

What is the NSN for MS20426B5-9?

MS20426B5-9 is cataloged in the U.S. Government catalog under NSN 5320-00-233-4760. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS20426B5-9 — RIVET,SOLID

Request a Quote — MS20426B5-9