MS20426AD4 — RIVET,SOLID

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MS20426AD4: RIVET,SOLID.

The RIVET,SOLID is a the manufacturer industrial component. Key specifications include end_item_identification: CXCY, part_name_assigned_by_controlling_agency: CH-53K SIKORSKY HEAVY LIFT HELICOPTER. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-117-6951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS20426AD4

NSN: 5320-00-117-6951
NIINs: 001176951, 014775749, 016687851
FSC: 5320 — Rivets
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

end_item_identification	CXCY
part_name_assigned_by_controlling_agency	CH-53K SIKORSKY HEAVY LIFT HELICOPTER
NSN	5320-00-117-6951

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN

•

SHANK STYLE: STRAIGHT W/RADIUS CHAMFERED TIP

•

SURFACE TREATMENT: ANODIZE OR OXIDE FILM OVERALL

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
FASTENER LENGTH	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
SHANK STYLE	STRAIGHT W/RADIUS CHAMFERED TIP
SURFACE TREATMENT	ANODIZE OR OXIDE FILM OVERALL
COUNTERSINK ANGLE	99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
SHEAR STRENGTH	26000 SINGLE POUNDS PER SQUARE INCH

SUBSTITUTES & CROSS-REFERENCES 8

GHN10001-53Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS20426AD4-6Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5-4-1333-17-27Reference document

Same NSN cross-reference

Reference document — Secondary reference

853912-00Reference document

Same NSN cross-reference

Reference document — Secondary reference

1026425AD4-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

3M268AD4-6Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MS20426AD4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS20426AD4?

MS20426AD4 is a RIVET,SOLID.

What parts can replace MS20426AD4?

There are 8 known substitutes for MS20426AD4: GHN10001-53, MS20426AD4-6, 5-4-1333-17-27 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS20426AD4?

MS20426AD4 is cataloged in the U.S. Government catalog under NSN 5320-00-117-6951. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS20426AD4 — RIVET,SOLID

Request a Quote — MS20426AD4