PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS20392-5C34
MS20392-5C34 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, material: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.078 INCHES NOMINAL IN, shear_strength: 16580 DOUBLE POUND.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-954-1289, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20392-5C34
NSN: 5315-00-954-1289
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
height0.062 INCHES NOMINAL IN
diameter0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
materialSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
head_stylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
chamfer_length0.078 INCHES NOMINAL IN
shear_strength16580 DOUBLE POUND
hardness_rating26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.500 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
under_head_length1.522 INCHES MINIMUM AND 1.542 INCHES MAXIMUM IN
NSN5315-00-954-1289
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20392-5C34 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.135 INCHES NOMINAL IN
•
HARDNESS RATING: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SHEAR STRENGTH: 16580 DOUBLE POUND
•
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
•
HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.135 INCHES NOMINAL IN
HARDNESS RATING26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SHEAR STRENGTH16580 DOUBLE POUND
MATERIALSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
HEIGHT0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
000-7198-000Interchangeable
interchangeable cross-reference
interchangeable
1-1153Interchangeable
interchangeable cross-reference
interchangeable
R11153Interchangeable
interchangeable cross-reference
interchangeable
HDH-09003GHDInterchangeable
interchangeable cross-reference
interchangeable
480107-1Interchangeable
interchangeable cross-reference
interchangeable
1205-0226Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS20392-5C34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20392-5C34?
MS20392-5C34 is a PIN,STRAIGHT,HEADED.
What parts can replace MS20392-5C34?
There are 22 known substitutes for MS20392-5C34: 000-7198-000, 1-1153, R11153 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20392-5C34?
MS20392-5C34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-954-1289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20392-5C34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026