PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS20392-1C59
MS20392-1C59 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, diameter: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, material: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.062 INCHES MAXIMUM IN, shear_strength: 1840 DOUBLE POUND.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-988-7660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20392-1C59
NSN: 5315-00-988-7660
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
height0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
diameter0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
materialSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
head_stylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
chamfer_length0.062 INCHES MAXIMUM IN
shear_strength1840 DOUBLE POUND
hardness_rating26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
special_featuresTHE SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR
style_designatorSTRAIGHT
pin_chamfer_angle14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
pin_head_diameter0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5315-00-988-7660
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20392-1C59 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
•
UNDER HEAD LENGTH: 1.960 INCHES MINIMUM AND 1.980 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
•
PIN HEAD DIAMETER: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
HEIGHT: 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEPAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
UNDER HEAD LENGTH1.960 INCHES MINIMUM AND 1.980 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
PIN HEAD DIAMETER0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
HARDNESS RATING26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
SPECIAL FEATURESTHE SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR
HEIGHT0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
ASTMF104-03Interchangeable
interchangeable cross-reference
interchangeable
2208-W-413Interchangeable
interchangeable cross-reference
interchangeable
56152R2Interchangeable
interchangeable cross-reference
interchangeable
10122842Interchangeable
Same NIIN cross-reference
interchangeable
NASM5673Interchangeable
Same NIIN cross-reference
interchangeable
2310540Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS20392-1C59?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20392-1C59?
MS20392-1C59 is a PIN,STRAIGHT,HEADED.
What parts can replace MS20392-1C59?
There are 6 known substitutes for MS20392-1C59: ASTMF104-03, 2208-W-413, 56152R2 and 3 more. Substitute compatibility should be verified for your specific system.
Is MS20392-1C59 still available?
MS20392-1C59 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20392-1C59

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026