PartsTable
Technical Data Sheet
Download PDF

MS20253P3-120 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS20253P3-120: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, first_end_style: CHAMFERED, surface_treatment: CADMIUM OVERALL, pin_overall_length: 1.185 INCHES MINIMUM AND 1.215 INCHES MAXIMUM IN, pin_overall_diameter: 0.116 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-707-8459, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20253P3-120
NSN: 5315-01-707-8459
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
first_end_styleCHAMFERED
special_featuresMATERIAL: ASTM A313, CLASS 1, TYPE 302, 304, OR 316 (CORROSION RESISTANT STEEL UNS S30200, UNS S30400, OR UNS S31600). FINISH: CADMIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 2. UNLUBRICATED.
surface_treatmentCADMIUM OVERALL
pin_overall_length1.185 INCHES MINIMUM AND 1.215 INCHES MAXIMUM IN
pin_overall_diameter0.116 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
specification/standard_data0U583-AS20253 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationASTM A313, CLASS 1, TYPE 302, 304, OR 316 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
part_name_assigned_by_controlling_agencyPIN, HINGE, CORROSION RESISTANT STEEL UNS S30200, UNS S30400, OR UNS S31600
NSN5315-01-707-8459
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20253P3-120 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A313, CLASS 1, TYPE 302, 304, OR 316 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ALL MATERIAL RESPONSES OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.116 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.185 INCHES MINIMUM AND 1.215 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A313, CLASS 1, TYPE 302, 304, OR 316 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ALL MATERIAL RESPONSES OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.116 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.185 INCHES MINIMUM AND 1.215 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIFICATION/STANDARD DATA0U583-AS20253 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESMATERIAL: ASTM A313, CLASS 1, TYPE 302, 304, OR 316 (CORROSION RESISTANT STEEL UNS S30200, UNS S30400, OR UNS S31600). FINISH: CADMIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 2. UNLUBRICATED.
SUBSTITUTES & CROSS-REFERENCES 1
AS20253 REV BReference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS20253P3-120?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20253P3-120?
MS20253P3-120 is a PIN,STRAIGHT,HEADLESS.
What parts can replace MS20253P3-120?
There is 1 known substitute for MS20253P3-120: AS20253 REV B. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20253P3-120?
MS20253P3-120 is cataloged in the U.S. Government catalog under NSN 5315-01-707-8459. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20253P3-120

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.