PartsTable
Technical Data Sheet
Download PDF

MS20253P2-267 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS20253P2-267: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 AND STEEL COMP 1035 AND STEEL COMP 1016 OVERALL, first_end_style: CHAMFERED, special_features: USED WITH ALUMINUM ALLOY HINGE HALVES, surface_treatment: CADMIUM OVERALL, pin_overall_length: 2.655 INCHES MINIMUM AND 2.685 INCHES MAXIMUM IN, pin_overall_diameter: 0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-469-8060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20253P2-267
NSN: 5315-01-469-8060
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 302 AND STEEL COMP 1035 AND STEEL COMP 1016 OVERALL
first_end_styleCHAMFERED
special_featuresUSED WITH ALUMINUM ALLOY HINGE HALVES
surface_treatmentCADMIUM OVERALL
pin_overall_length2.655 INCHES MINIMUM AND 2.685 INCHES MAXIMUM IN
pin_overall_diameter0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.015 INCHES NOMINAL IN
specification/standard_data96906-MS20253REV-E GOVERNMENT SPECIFICATION
material_document_and_classificationQQ-W-423,FORM-1,COND-B FED SPEC ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-416,TYPE-II,CLASS-2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-01-469-8060
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20253P2-267 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE-II,CLASS-2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423,FORM-1,COND-B FED SPEC ALL MATERIAL RESPONSES OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.655 INCHES MINIMUM AND 2.685 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE-II,CLASS-2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423,FORM-1,COND-B FED SPEC ALL MATERIAL RESPONSES OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.655 INCHES MINIMUM AND 2.685 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIFICATION/STANDARD DATA96906-MS20253REV-E GOVERNMENT SPECIFICATION
SPECIAL FEATURESUSED WITH ALUMINUM ALLOY HINGE HALVES
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS20253Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS20253P2-267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20253P2-267?
MS20253P2-267 is a PIN,STRAIGHT,HEADLESS.
What parts can replace MS20253P2-267?
There is 1 known substitute for MS20253P2-267: SAE-AS20253. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20253P2-267?
MS20253P2-267 is cataloged in the U.S. Government catalog under NSN 5315-01-469-8060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20253P2-267

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.