PartsTable
Technical Data Sheet
Download PDF

MS20253P2-2654 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS20253P2-2654: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include pin_overall_length: 26.540 INCHES NOMINAL IN, pin_overall_diameter: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, part_name_assigned_by_controlling_agency: PIN,HINGE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-505-0155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20253P2-2654
NSN: 5315-01-505-0155
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
pin_overall_length26.540 INCHES NOMINAL IN
pin_overall_diameter0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyPIN,HINGE
NSN5315-01-505-0155
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20253P2-2654 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 26.540 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PIN OVERALL DIAMETER0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
PIN OVERALL LENGTH26.540 INCHES NOMINAL IN
SPECIAL FEATURESMATT: STEEL CORROSION RESISTING PIN;SURFACE TREATMENT: CADMIUM PIN;SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE PIN;CHAMFER LENGTH: 0.015 IN. NOM.;CHAMFER ANGLE: 45.0 DEG. NOM.;COLOR: NATURAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPIN,HINGE
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS20253Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS20253P2-2654?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20253P2-2654?
MS20253P2-2654 is a PIN,STRAIGHT,HEADLESS.
What parts can replace MS20253P2-2654?
There is 1 known substitute for MS20253P2-2654: SAE-AS20253. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20253P2-2654?
MS20253P2-2654 is cataloged in the U.S. Government catalog under NSN 5315-01-505-0155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20253P2-2654

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.