PartsTable
Technical Data Sheet
Download PDF

MS20253-2-5150L — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS20253-2-5150L: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL, first_end_style: SQUARE, special_features: PIN,HINGE FOR USE WITH CRES HINGES COVERED BY MS20257 AND MS20001,REMOVE ALL BURRS AND SHARP EDGES, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 5.135 INCHES MINIMUM AND 5.165 INCHES MAXIMUM IN, pin_overall_diameter: 0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-199-6043, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20253-2-5150L
NSN: 5315-01-199-6043
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
first_end_styleSQUARE
special_featuresPIN,HINGE FOR USE WITH CRES HINGES COVERED BY MS20257 AND MS20001,REMOVE ALL BURRS AND SHARP EDGES
surface_treatmentPASSIVATE OVERALL
pin_overall_length5.135 INCHES MINIMUM AND 5.165 INCHES MAXIMUM IN
pin_overall_diameter0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN
specification/standard_data96906-MS20253 GOVERNMENT STANDARD
material_document_and_classificationASTM A580 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-35 FED STD ALL TREATMENT RESPONSES OVERALL
NSN5315-01-199-6043
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20253-2-5150L · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED STD ALL TREATMENT RESPONSES OVERALL
•
FIRST END STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 5.135 INCHES MINIMUM AND 5.165 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SPECIFICATION/STANDARD DATA: 96906-MS20253 GOVERNMENT STANDARD
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED STD ALL TREATMENT RESPONSES OVERALL
FIRST END STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A580 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM IN
PIN OVERALL LENGTH5.135 INCHES MINIMUM AND 5.165 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIFICATION/STANDARD DATA96906-MS20253 GOVERNMENT STANDARD
SPECIAL FEATURESPIN,HINGE FOR USE WITH CRES HINGES COVERED BY MS20257 AND MS20001,REMOVE ALL BURRS AND SHARP EDGES
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS20253Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS20253-2-5150Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS20253-2-5150L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20253-2-5150L?
MS20253-2-5150L is a PIN,STRAIGHT,HEADLESS.
What parts can replace MS20253-2-5150L?
There are 2 known substitutes for MS20253-2-5150L: SAE-AS20253, MS20253-2-5150. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20253-2-5150L?
MS20253-2-5150L is cataloged in the U.S. Government catalog under NSN 5315-01-199-6043. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20253-2-5150L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.