PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS20218-2
MS20218-2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,BELL CRANK is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, flange_width: 0.0625 INCHES NOMINAL IN, inner_ring_width: 0.6875 INCHES NOMINAL IN, outer_ring_width: 0.5620 INCHES NOMINAL IN, style_designator: DOUBLE ROW BALL, DOUBLE CLOSURE, RIGID INNER RING EXTENDED BOTH SIDES, bearing_seal_type: CONTACT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-068-8119, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20218-2
NSN: 3110-00-068-8119
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL RETAINER
flange_width0.0625 INCHES NOMINAL IN
seal_quantity2
inner_ring_width0.6875 INCHES NOMINAL IN
outer_ring_width0.5620 INCHES NOMINAL IN
style_designatorDOUBLE ROW BALL, DOUBLE CLOSURE, RIGID INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
rivet_hole_diameter0.1406 INCHES NOMINAL IN
rivet_hole_quantity12
lubrication_materialGREASE
flange_outside_diameter1.6875 INCHES NOMINAL IN
NSN3110-00-068-8119
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS20218-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
DISTANCE BETWEEN FLANGE HOLE CENTERS: 1.3750 INCHES MINIMUM AND 1.3800 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
•
OUTER RING OUTSIDE DIAMETER: 0.8650 INCHES MINIMUM AND 0.8850 INCHES MAXIMUM IN
•
FLANGE OUTSIDE DIAMETER: 1.6770 INCHES MINIMUM AND 1.6970 INCHES MAXIMUM IN
•
INNER RING WIDTH: 0.6820 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM IN
•
OUTER RING WIDTH: 0.5570 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
DISTANCE BETWEEN FLANGE HOLE CENTERS1.3750 INCHES MINIMUM AND 1.3800 INCHES MAXIMUM IN
FLANGE WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
OUTER RING OUTSIDE DIAMETER0.8650 INCHES MINIMUM AND 0.8850 INCHES MAXIMUM IN
FLANGE OUTSIDE DIAMETER1.6770 INCHES MINIMUM AND 1.6970 INCHES MAXIMUM IN
INNER RING WIDTH0.6820 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM IN
OUTER RING WIDTH0.5570 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
RIVET HOLE DIAMETER0.1400 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AN218-5ANG25Interchangeable
interchangeable cross-reference
interchangeable
5743-23Interchangeable
interchangeable cross-reference
interchangeable
AN218P5Interchangeable
interchangeable cross-reference
interchangeable
BCP5W11FS302Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS20218-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20218-2?
MS20218-2 is a BEARING,BALL,BELL CRANK.
What parts can replace MS20218-2?
There are 4 known substitutes for MS20218-2: AN218-5ANG25, 5743-23, AN218P5 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20218-2?
MS20218-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-068-8119. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20218-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026