PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS20207DPP10
MS20207DPP10 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL, bore_diameter: 0.6250 INCHES NOMINAL IN, alignment_type: RIGID, load_direction: RADIAL, inner_ring_width: 0.9950 INCHES NOMINAL IN, outer_ring_width: 0.9200 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-042-4532, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20207DPP10
NSN: 3110-00-042-4532
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL
bore_diameter0.6250 INCHES NOMINAL IN
seal_quantity2
alignment_typeRIGID
load_directionRADIAL
inner_ring_width0.9950 INCHES NOMINAL IN
outer_ring_width0.9200 INCHES NOMINAL IN
style_designatorDOUBLE ROW
bearing_seal_typeCONTACT
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
internal_clearance0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
overall_outside_diameter1.9375 INCHES NOMINAL IN
NSN3110-00-042-4532
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS20207DPP10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.9375 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
•
INTERNAL CLEARANCE: 0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
•
BEARING SEAL TYPE: CONTACT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.9375 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
INTERNAL CLEARANCE0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
BEARING SEAL TYPECONTACT
LOAD DIRECTIONRADIAL
SPECIAL FEATURES80 PCT. FULL OF MIL-G-81322,AXIAL PLAY 0.007 IN.,HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG F,RADIAL AND LATERAL ECCENTRICITY 0.0010 IN. INNER RING,0.0016 IN. OUTER RING IN
OUTER RING WIDTH0.9200 INCHES NOMINAL IN
INNER RING WIDTH0.9950 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
AS27644Interchangeable
interchangeable cross-reference
interchangeable
DPP4 FS464Interchangeable
interchangeable cross-reference
interchangeable
AS27644-4Interchangeable
interchangeable cross-reference
interchangeable
DPP5FS464Interchangeable
interchangeable cross-reference
interchangeable
3100938Interchangeable
interchangeable cross-reference
interchangeable
MS27644-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS20207DPP10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20207DPP10?
MS20207DPP10 is a BEARING,BALL,AIRFRAME.
What parts can replace MS20207DPP10?
There are 17 known substitutes for MS20207DPP10: AS27644, DPP4 FS464, AS27644-4 and 14 more. Substitute compatibility should be verified for your specific system.
Is MS20207DPP10 still available?
MS20207DPP10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20207DPP10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026