PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS20200KP10
MS20200KP10 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING RETAINER, bore_diameter: 0.6250 INCHES NOMINAL IN, load_direction: RADIAL, inner_ring_width: 0.6200 INCHES NOMINAL IN, outer_ring_width: 0.5000 INCHES NOMINAL IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-023-4022, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20200KP10
NSN: 3110-00-023-4022
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL CORROSION RESISTING RETAINER
bore_diameter0.6250 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.6200 INCHES NOMINAL IN
outer_ring_width0.5000 INCHES NOMINAL IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
overall_outside_diameter1.9375 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
material_document_and_classificationAMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL
NSN3110-00-023-4022
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS20200KP10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
OUTER RING WIDTH: 0.5000 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.6200 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
•
BEARING SEAL TYPE: CONTACT
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
OUTER RING WIDTH0.5000 INCHES NOMINAL IN
INNER RING WIDTH0.6200 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
BEARING SEAL TYPECONTACT
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
SEAL QUANTITY2
SPECIAL FEATURES80 PERCENT OF MIL-G-81322,INTERNAL RADIAL CLEARANCE 0.0004 IN.MIN,0.0010 IN. MAX HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG F,RADIAL AND LATERAL ECCENTRICITY INNER RING 0.0010 IN. OUTER RING 0.0016 IN. IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SEAL
OVERALL OUTSIDE DIAMETER1.9375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
KP3Interchangeable
interchangeable cross-reference
interchangeable
AS27640Interchangeable
interchangeable cross-reference
interchangeable
KP3FS160Interchangeable
interchangeable cross-reference
interchangeable
KP3LInterchangeable
interchangeable cross-reference
interchangeable
KP3LFS464Interchangeable
interchangeable cross-reference
interchangeable
MS27640-3AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS20200KP10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20200KP10?
MS20200KP10 is a BEARING,BALL,AIRFRAME.
What parts can replace MS20200KP10?
There are 29 known substitutes for MS20200KP10: KP3, AS27640, KP3FS160 and 26 more. Substitute compatibility should be verified for your specific system.
Is MS20200KP10 still available?
MS20200KP10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20200KP10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026