PartsTable
Technical Data Sheet
Download PDF

MS20115-8 — SHACKLE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MS20115-8: SHACKLE.

The SHACKLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, eyelet_style: ROUND PLAIN, opening_width: 0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, major_diameter: 0.375 INCHES NOMINAL IN, minor_diameter: 0.343 INCHES NOMINAL IN, inside_diameter: 0.438 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4030-00-018-7602, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20115-8
NSN: 4030-00-018-7602
FSC: 4030 — Fittings for Rope, Cable, and Chain
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
eyelet_styleROUND PLAIN
opening_width0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
major_diameter0.375 INCHES NOMINAL IN
minor_diameter0.343 INCHES NOMINAL IN
inside_diameter0.438 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
style_designatorWIRE ROPE
leg_end_thickness0.187 INCHES NOMINAL IN
eye_inside_diameter0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
distance_from_bail_center_to_hole_center0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
NSN4030-00-018-7602
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SHACKLE TITLE COMPONENT PN MS20115-8 MFR SHACKLE
KEY FEATURES
•
STYLE DESIGNATOR: WIRE ROPE
•
OPENING WIDTH: 0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
EYELET STYLE: ROUND PLAIN
•
DISTANCE FROM BAIL CENTER TO HOLE CENTER: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 0.438 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
•
EYE INSIDE DIAMETER: 0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
LEG END THICKNESS: 0.187 INCHES NOMINAL IN
•
MINOR DIAMETER: 0.343 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORWIRE ROPE
OPENING WIDTH0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
EYELET STYLEROUND PLAIN
DISTANCE FROM BAIL CENTER TO HOLE CENTER0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
INSIDE DIAMETER0.438 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
EYE INSIDE DIAMETER0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
LEG END THICKNESS0.187 INCHES NOMINAL IN
MINOR DIAMETER0.343 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING
MAJOR DIAMETER0.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
MIL-DTL-5675Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS20115-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20115-8?
MS20115-8 is a SHACKLE.
What parts can replace MS20115-8?
There is 1 known substitute for MS20115-8: MIL-DTL-5675. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20115-8?
MS20115-8 is cataloged in the U.S. Government catalog under NSN 4030-00-018-7602. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20115-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.