PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS20074-10-16
MS20074-10-16 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include hole_type: DRILLED, head_style: HEXAGON, grip_length: 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN, head_height: 0.453 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN, thread_class: 3A A, hole_diameter: 0.070 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-063-3268, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20074-10-16
NSN: 5306-00-063-3268
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
hole_typeDRILLED
head_styleHEXAGON
grip_length0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
head_height0.453 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
thread_class3A A
hole_diameter0.070 INCHES NOMINAL IN
hole_quantity6
thread_length0.968 INCHES MINIMUM IN
fastener_length1.796 INCHES MINIMUM AND 1.843 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5306-00-063-3268
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS20074-10-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.968 INCHES MINIMUM IN
•
THREAD CLASS: 3A A
•
HEAD STYLE: HEXAGON
•
HOLE DIAMETER: 0.070 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HOLE TYPE: DRILLED
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.968 INCHES MINIMUM IN
THREAD CLASS3A A
HEAD STYLEHEXAGON
HOLE DIAMETER0.070 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HOLE TYPEDRILLED
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.928 INCHES MINIMUM AND 0.939 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AN3-4Upgraded Successor
successor cross-reference
successor
MILB6812Upgraded Successor
successor cross-reference
successor
85H30Upgraded Successor
successor cross-reference
successor
NASM6812Upgraded Successor
successor cross-reference
successor
83T26Upgraded Successor
successor cross-reference
successor
AN173H26Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS20074-10-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20074-10-16?
MS20074-10-16 is a BOLT,MACHINE.
What parts can replace MS20074-10-16?
There are 14 known substitutes for MS20074-10-16: AN3-4, MILB6812, 85H30 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20074-10-16?
MS20074-10-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-063-3268. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20074-10-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026