PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS20074-03-07
MS20074-03-07 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include hole_type: DRILLED, head_style: HEXAGON, grip_length: 0.359 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN, head_height: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, thread_class: 3A A, hole_diameter: 0.070 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-835-9587, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20074-03-07
NSN: 5306-00-835-9587
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 4140 OVERALL
hole_typeDRILLED
head_styleHEXAGON
grip_length0.359 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
head_height0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
thread_class3A A
hole_diameter0.070 INCHES NOMINAL IN
hole_quantity6
thread_length0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
fastener_length0.890 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5306-00-835-9587
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS20074-03-07 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
•
GRIP LENGTH: 0.359 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
•
FEATURES PROVIDED: FINISHED HEAD
•
THREAD LENGTH: 0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HOLE DIAMETER: 0.070 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
GRIP LENGTH0.359 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
FEATURES PROVIDEDFINISHED HEAD
THREAD LENGTH0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HOLE DIAMETER0.070 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 6TH MATERIAL RESPONSE OVERALL
HOLE CONFIGURATION STYLEHEXAGON LONGITUDINAL HOLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
GD796RUpgraded Successor
successor cross-reference
successor
6515NCM060666Upgraded Successor
successor cross-reference
successor
2256Upgraded Successor
successor cross-reference
successor
6515NCM105683Upgraded Successor
successor cross-reference
successor
PEDS SPO2 SENSOR REUSABLEUpgraded Successor
successor cross-reference
successor
20236Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS20074-03-07?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20074-03-07?
MS20074-03-07 is a BOLT,MACHINE.
What parts can replace MS20074-03-07?
There are 18 known substitutes for MS20074-03-07: GD796R, 6515NCM060666, 2256 and 15 more. Substitute compatibility should be verified for your specific system.
Is MS20074-03-07 still available?
MS20074-03-07 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20074-03-07

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026