PartsTable
Technical Data Sheet
Download PDF

MS20002-10 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS20002-10: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1330 OR STEEL COMP 4130 OVERALL, thickness: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN, hole_diameter: 0.631 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM, overall_diameter: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-149-9126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20002-10
NSN: 5310-00-149-9126
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 1330 OR STEEL COMP 4130 OVERALL
thickness0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
hole_diameter0.631 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
overall_diameter1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
minimum_tensile_strength125000 POUNDS PER SQUARE INCH LBS
cross-sectional_shape_styleRECTANGULAR
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-149-9126
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20002-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1330 OR STEEL COMP 4130 OVERALL
CENTER HOLE SHAPE STYLEROUND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 6
10082395Reference document
Same NSN cross-reference
Reference document — Informative reference only
850853-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
NAS143-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0150702Reference document
Same NSN cross-reference
Reference document — Informative reference only
5310001499126Reference document
Same NSN cross-reference
Reference document — Informative reference only
124-4322603 PC 127Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS20002-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20002-10?
MS20002-10 is a WASHER,FLAT.
What parts can replace MS20002-10?
There are 6 known substitutes for MS20002-10: 10082395, 850853-00, NAS143-10 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20002-10?
MS20002-10 is cataloged in the U.S. Government catalog under NSN 5310-00-149-9126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20002-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.