PartsTable
Technical Data Sheet
Download PDF

MS18153-44 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS18153-44: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include hole_type: DRILLED, head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, hole_diameter: 0.062 INCHES NOMINAL IN, thread_length: 0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-088-7956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS18153-44
NSN: 5305-01-088-7956
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
hole_typeDRILLED
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
thread_length0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN
fastener_length3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NSN5305-01-088-7956
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS18153-44 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
FASTENER LENGTH: 3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
FASTENER LENGTH3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEHEXAGON FLATS
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
B1821BH031F350DReference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS18153-44?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS18153-44?
MS18153-44 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS18153-44?
There are 2 known substitutes for MS18153-44: B1821BH031F350D, FF-S-85. Substitute compatibility should be verified for your specific system.
What is the NSN for MS18153-44?
MS18153-44 is cataloged in the U.S. Government catalog under NSN 5305-01-088-7956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS18153-44

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.