MS17828-5C — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS17828-5C: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include end_item_identification: OPERATOR,LOT HATCH, criticality_code_justification: ZZZX, part_name_assigned_by_controlling_agency: (INAVY)NUT,HEX,SLFLKG. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-409-3701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS17828-5C

NSN: 5310-00-409-3701
NIINs: 004093701, 012923297, 013457147, 015409573
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

end_item_identification	OPERATOR,LOT HATCH
criticality_code_justification	ZZZX
part_name_assigned_by_controlling_agency	(INAVY)NUT,HEX,SLFLKG
NSN	5310-00-409-3701

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.492 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN

•

BEARING SURFACE FINISH: 125.0 MICROINCHES

•

THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)

•

TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066,CPMP A,TYPE 1 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.312 INCHES IN

•

LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.492 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
BEARING SURFACE FINISH	125.0 MICROINCHES
THREAD SERIES	UNIFIED NATIONAL COARSE (UNC)
TEMP RATING	250.0 FAHRENHEIT NOMINAL DEGF
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D4066,CPMP A,TYPE 1 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.312 INCHES IN
LOCKING FEATURE	PREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT	0.271 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
COUNTERSINK ANGLE	88.0 DEGREES NOMINAL NUT

SUBSTITUTES & CROSS-REFERENCES 5

09NE058Reference document

Same NSN cross-reference

Reference document — Secondary reference

09NE518Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

67A4C2Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

0.312-18UNC-3B NICUReference document

Same NSN cross-reference

Reference document — Identification reference

09NE-058(MONEL)Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy MS17828-5C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS17828-5C?

MS17828-5C is a NUT,SELF-LOCKING,HEXAGON.

What parts can replace MS17828-5C?

There are 5 known substitutes for MS17828-5C: 09NE058, 09NE518, 67A4C2 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS17828-5C?

MS17828-5C is cataloged in the U.S. Government catalog under NSN 5310-00-409-3701. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS17828-5C — NUT,SELF-LOCKING,HEXAGON

Request a Quote — MS17828-5C