PartsTable
Technical Data Sheet
Download PDF

MS17828-4C — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS17828-4C: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include end_item_identification: LOCKOUT TRUNK MANUAL REMOTE OPERATOR TD-138, criticality_code_justification: ZZZY, part_name_assigned_by_controlling_agency: NUT, HEX, SELF-LOCKING. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-031-0920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17828-4C
NSN: 5310-00-031-0920
NIINs: 000310920, 013311591, 016496995
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
end_item_identificationLOCKOUT TRUNK MANUAL REMOTE OPERATOR TD-138
criticality_code_justificationZZZY
part_name_assigned_by_controlling_agencyNUT, HEX, SELF-LOCKING
NSN5310-00-031-0920
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS17828-4C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D44066,COMP A,TYPE 1 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D44066,COMP A,TYPE 1 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.240 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
COUNTERSINK ANGLE88.0 DEGREES NOMINAL NUT
SUBSTITUTES & CROSS-REFERENCES 10
751-6402608 FIND 19Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M17828-4CReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
751-6402602-20Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
563-6405731-37Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
721-7068583-65Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
751-6402604 FIND 20Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS17828-4C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17828-4C?
MS17828-4C is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace MS17828-4C?
There are 10 known substitutes for MS17828-4C: 751-6402608 FIND 19, M17828-4C, 751-6402602-20 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17828-4C?
MS17828-4C is cataloged in the U.S. Government catalog under NSN 5310-00-031-0920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17828-4C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.