MS17826-10 — NUT,SELF-LOCKING,SLOTTED,HEXAGON

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS17826-10: NUT,SELF-LOCKING,SLOTTED,HEXAGON.

NUT,SELF-LOCKING,SLOTTED,HEXAGON. Key specifications include material: STEEL NUT, nut_style: SLOTTED, HEXAGON, nut_height: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-111-3813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS17826-10

NSN: 5310-00-111-3813
NIINs: 001113813, 013882087
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	STEEL NUT
nut_style	SLOTTED, HEXAGON
nut_height	0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
temp_rating	250.0 FAHRENHEIT NOMINAL DEGF
thread_class	3B
thread_series	UNIFIED NATIONAL JOINT FINE (UNJF)
locking_feature	PREVAILING TORQUE WITH NONMETALLIC INSERT
special_features	VARIABLE PRICING ITEM; UNIT OF ISSUE PACKAGE EQUAL 50 EA; TO ORDER UNIT OF ISSUE EACH, USE NSN 5310001113813
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM AND CHROMATE OVERALL EXCEPT INSERT
width_across_flats	0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
nominal_thread_size	0.625 INCHES IN
NSN	5310-00-111-3813

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT

•

THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)

•

TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.625 INCHES IN

•

LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT

•

NUT HEIGHT: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
THREAD SERIES	UNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING	250.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.625 INCHES IN
LOCKING FEATURE	PREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT	0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
SPECIAL FEATURES	VARIABLE PRICING ITEM; UNIT OF ISSUE EACH EQUALS 1; TO ORDER UNIT OF ISSUE PACKAGE, USE NSN 5310013882087.
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL EXCEPT INSERT

SUBSTITUTES & CROSS-REFERENCES 3

VARIABLE PRICINGReference document

Same NSN cross-reference

Reference document — Secondary reference

F12NTEC-1018Reference document

Same NSN cross-reference

Reference document — Secondary reference

5310PL2213906Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS17826-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS17826-10?

MS17826-10 is a NUT,SELF-LOCKING,SLOTTED,HEXAGON.

What parts can replace MS17826-10?

There are 3 known substitutes for MS17826-10: VARIABLE PRICING, F12NTEC-1018, 5310PL2213906. Substitute compatibility should be verified for your specific system.

What is the NSN for MS17826-10?

MS17826-10 is cataloged in the U.S. Government catalog under NSN 5310-00-111-3813. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS17826-10 — NUT,SELF-LOCKING,SLOTTED,HEXAGON

Request a Quote — MS17826-10