PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17811-15
MS17811-15 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN, material: STEEL COMP 1020 OVERALL, corner_shape: SQUARE ALL CORNERS, surface_finish: 32.0 MICROINCHES RIGHT SIDE, hardness_rating: 58.0 ROCKWELL C MINIMUM OVERALL, outside_diameter: 0.7520 INCHES MINIMUM AND 0.7570 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-969-2325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17811-15
NSN: 3120-00-969-2325
FSC: 3120
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
materialSTEEL COMP 1020 OVERALL
corner_shapeSQUARE ALL CORNERS
surface_finish32.0 MICROINCHES RIGHT SIDE
hardness_rating58.0 ROCKWELL C MINIMUM OVERALL
outside_diameter0.7520 INCHES MINIMUM AND 0.7570 INCHES MAXIMUM IN
style_designatorROUND
features_providedCASEHARDENED
overall_thickness0.1540 INCHES MINIMUM AND 0.1580 INCHES MAXIMUM IN
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-969-2325
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MS17811-15 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES RIGHT SIDE
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM OVERALL
•
FEATURES PROVIDED: CASEHARDENED
•
MATERIAL: STEEL COMP 1020 OVERALL
•
STYLE DESIGNATOR: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
CORNER SHAPE: SQUARE ALL CORNERS
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISH32.0 MICROINCHES RIGHT SIDE
HARDNESS RATING58.0 ROCKWELL C MINIMUM OVERALL
FEATURES PROVIDEDCASEHARDENED
SURFACE FINISH32.0 MICROINCHES LEFT SIDE
MATERIALSTEEL COMP 1020 OVERALL
STYLE DESIGNATORROUND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
CORNER SHAPESQUARE ALL CORNERS
OVERALL THICKNESS0.1540 INCHES MINIMUM AND 0.1580 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.7520 INCHES MINIMUM AND 0.7570 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
14551102 PIECEInterchangeable
interchangeable cross-reference
interchangeable
MS17811Interchangeable
interchangeable cross-reference
interchangeable
MS17811-11Interchangeable
interchangeable cross-reference
interchangeable
MS17811-17Interchangeable
interchangeable cross-reference
interchangeable
MS17811-8Interchangeable
interchangeable cross-reference
interchangeable
MS17811-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17811-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17811-15?
MS17811-15 is a BEARING,WASHER,THRUST.
What parts can replace MS17811-15?
There are 14 known substitutes for MS17811-15: 14551102 PIECE, MS17811, MS17811-11 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17811-15?
MS17811-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-969-2325. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17811-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026