PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17796-29
MS17796-29 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE LEFT FLANGE BODY CORNER, flange_width: 0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN, overall_length: 0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL, style_designator: SOLID, EXTERNAL FLANGE ONE END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-005-0466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17796-29
NSN: 3120-00-005-0466
FSC: 3120
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE LEFT FLANGE BODY CORNER
flange_width0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
overall_length0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
body_outside_diameter0.4390 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN
flange_outside_diameter0.5600 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM IN
material_document_and_classificationMIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
NSN3120-00-005-0466
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MS17796-29 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 0.5600 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
•
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 0.4390 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
•
CORNER SHAPE: SQUARE LEFT FLANGE BODY CORNER
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE OUTSIDE DIAMETER0.5600 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM IN
FLANGE WIDTH0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.4390 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
MATERIALOIL LUBRICATING LUBRICATION
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
MS17796Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17796-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17796-29?
MS17796-29 is a BEARING,SLEEVE.
What parts can replace MS17796-29?
There is 1 known substitute for MS17796-29: MS17796. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17796-29?
MS17796-29 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-005-0466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17796-29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026