PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17796-26
MS17796-26 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: OIL LUBRICATING LUBRICATION, corner_shape: SQUARE OUTSIDE RIGHT CORNER, flange_width: 0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN, overall_length: 0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN, hardness_rating: 30.0 ROCKWELL H MINIMUM AND 70.0 ROCKWELL H MAXIMUM OVERALL, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-114-3852, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17796-26
NSN: 3120-01-114-3852
FSC: 3120
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialOIL LUBRICATING LUBRICATION
corner_shapeSQUARE OUTSIDE RIGHT CORNER
flange_width0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
overall_length0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN
hardness_rating30.0 ROCKWELL H MINIMUM AND 70.0 ROCKWELL H MAXIMUM OVERALL
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
body_outside_diameter0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN
flange_outside_diameter0.4663 INCHES MINIMUM AND 0.4713 INCHES MAXIMUM IN
material_document_and_classificationMIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
NSN3120-01-114-3852
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MS17796-26 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE LEFT FLANGE BODY CORNER
•
FLANGE OUTSIDE DIAMETER: 0.4663 INCHES MINIMUM AND 0.4713 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
•
MATERIAL: OIL LUBRICATING LUBRICATION
•
HARDNESS RATING: 30.0 ROCKWELL H MINIMUM AND 70.0 ROCKWELL H MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER0.4663 INCHES MINIMUM AND 0.4713 INCHES MAXIMUM IN
FLANGE WIDTH0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
MATERIALOIL LUBRICATING LUBRICATION
HARDNESS RATING30.0 ROCKWELL H MINIMUM AND 70.0 ROCKWELL H MAXIMUM OVERALL
CORNER SHAPESQUARE INSIDE RIGHT CORNER
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
8-60919-9Interchangeable
interchangeable cross-reference
interchangeable
8-60919-5Interchangeable
interchangeable cross-reference
interchangeable
13159Interchangeable
interchangeable cross-reference
interchangeable
R51Interchangeable
interchangeable cross-reference
interchangeable
510Interchangeable
interchangeable cross-reference
interchangeable
25651Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17796-26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17796-26?
MS17796-26 is a BEARING,SLEEVE.
What parts can replace MS17796-26?
There are 21 known substitutes for MS17796-26: 8-60919-9, 8-60919-5, 13159 and 18 more. Substitute compatibility should be verified for your specific system.
Is MS17796-26 still available?
MS17796-26 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17796-26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026