PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17795-54
MS17795-54 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 0.3440 INCHES NOMINAL IN, body_inside_diameter: 0.4050 INCHES MINIMUM AND 0.4120 INCHES MAXIMUM IN, body_outside_diameter: 0.6280 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-131-7089, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17795-54
NSN: 3120-00-131-7089
FSC: 3120
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
overall_length0.3440 INCHES NOMINAL IN
body_inside_diameter0.4050 INCHES MINIMUM AND 0.4120 INCHES MAXIMUM IN
body_outside_diameter0.6280 INCHES NOMINAL IN
NSN3120-00-131-7089
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MS17795-54 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY INSIDE DIAMETER: 0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
TECHNICAL CHARACTERISTICS (FLIS)
BODY INSIDE DIAMETER0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN
OVERALL LENGTH0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-5687 TYPE 1 COMP A OR B MIL SPEC ALL MATERIAL RESPONSES OVERALL
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER0.6270 INCHES MINIMUM AND 0.6280 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
P403Interchangeable
interchangeable cross-reference
interchangeable
8330900Interchangeable
interchangeable cross-reference
interchangeable
CW108MInterchangeable
interchangeable cross-reference
interchangeable
PMX-123NInterchangeable
interchangeable cross-reference
interchangeable
166 2394Interchangeable
interchangeable cross-reference
interchangeable
COPY-DOT DUPLICATING 2581Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17795-54?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17795-54?
MS17795-54 is a FILTER ELEMENT,FLUID.
What parts can replace MS17795-54?
There are 13 known substitutes for MS17795-54: P403, 8330900, CW108M and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17795-54?
MS17795-54 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-131-7089. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17795-54

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026