PartsTable
Technical Data Sheet
PartsTable / O-RING / MS17413-155
MS17413-155 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 4.159 INCHES MINIMUM AND 4.227 INCHES MAXIMUM IN, center_hole_diameter: 3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-8400, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17413-155
NSN: 5331-00-166-8400
FSC: 5331 — O-RING
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter4.159 INCHES MINIMUM AND 4.227 INCHES MAXIMUM IN
center_hole_diameter3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-166-8400
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS17413-155 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 4.159 INCHES MINIMUM AND 4.227 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER3.959 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER4.159 INCHES MINIMUM AND 4.227 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
2155Interchangeable
interchangeable cross-reference
interchangeable
1617823Interchangeable
interchangeable cross-reference
interchangeable
BUWEPSDWG1617823Interchangeable
interchangeable cross-reference
interchangeable
MS35333-113Interchangeable
interchangeable cross-reference
interchangeable
MILW6986TYPEAInterchangeable
interchangeable cross-reference
interchangeable
13230E6743Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17413-155?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17413-155?
MS17413-155 is a O-RING.
What parts can replace MS17413-155?
There are 24 known substitutes for MS17413-155: 2155, 1617823, BUWEPSDWG1617823 and 21 more. Substitute compatibility should be verified for your specific system.
Is MS17413-155 still available?
MS17413-155 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17413-155

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026