PartsTable
Technical Data Sheet
Download PDF

MS17231 — GRIP,HANDLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS17231: GRIP,HANDLE.

The GRIP,HANDLE is a the manufacturer industrial component. Key specifications include material: PLASTIC BODY, special_features: ACCOMMODATES LAMP INDUSTRY NO. 4512, features_provided: SWITCH AND REPLACEABLE BATTERY, light_beam_motion: FIXED, voltage_rating_in_volts: 125.0 AC NOMINAL AND 6.0 DC NOMINAL, terminal_type_and_quantity: 2 SCREW.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-776-5920, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17231
NSN: 5340-00-776-5920
NIINs: 007765920, 009264346
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC BODY
special_featuresACCOMMODATES LAMP INDUSTRY NO. 4512
features_providedSWITCH AND REPLACEABLE BATTERY
light_beam_motionFIXED
voltage_rating_in_volts125.0 AC NOMINAL AND 6.0 DC NOMINAL
terminal_type_and_quantity2 SCREW
lamp_base_type_accommodatedTWO SCREW TERMINALS
furnished_items_and_quantity1 LAMP
battery_type_and_quantity_required2 DRY
lamp_type_accommodated_and_quantity1 INCANDESCENT
hazardous_locations/environmental_protectionWATERTIGHT-NEMA TYPE 4
NSN5340-00-776-5920
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS17231 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 2.250 INCHES NOMINAL IN
•
PLATE LENGTH: 3.625 INCHES NOMINAL IN
•
INTEGRAL SHAFT STYLE: THREADED
•
MOUNTING FACILITY QUANTITY: 6
•
SHAFT ACCOMMODATION STYLE: ROUND
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.562 INCHES NOMINAL IN
•
MOUNTING FACILITY LENGTH: 0.183 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED STUD(S)
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER2.250 INCHES NOMINAL IN
PLATE LENGTH3.625 INCHES NOMINAL IN
INTEGRAL SHAFT STYLETHREADED
MOUNTING FACILITY QUANTITY6
SHAFT ACCOMMODATION STYLEROUND
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.562 INCHES NOMINAL IN
MOUNTING FACILITY LENGTH0.183 INCHES NOMINAL IN
MOUNTING METHODTHREADED STUD(S)
PLATE WIDTH1.750 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
M16377/53-002Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MILF16377/53Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-DTL-16377/53Reference document
Same NSN cross-reference
Reference document — Identification reference
MS17231PCS8-14-18-19-37-38-46-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340PL1362344Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
HAZMAT per U.S. Government catalogNo demilitarization required
Ready to buy MS17231?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17231?
MS17231 is a GRIP,HANDLE.
What parts can replace MS17231?
There are 5 known substitutes for MS17231: M16377/53-002, MILF16377/53, MIL-DTL-16377/53 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17231?
MS17231 is cataloged in the U.S. Government catalog under NSN 5340-00-776-5920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17231

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.