PartsTable
Technical Data Sheet
Download PDF

MS17169-10 — BEARING,ROLLER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MS17169-10: BEARING,ROLLER,THRUST.

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, bore_diameter: 1.1971 INCHES MINIMUM AND 1.1979 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.6245 INCHES MINIMUM AND 0.6255 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: TAPERED ROLLERS, BANDED OD. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-117-0772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17169-10
NSN: 3110-00-117-0772
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
bore_diameter1.1971 INCHES MINIMUM AND 1.1979 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.6245 INCHES MINIMUM AND 0.6255 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorTAPERED ROLLERS, BANDED OD
overall_outside_diameter2.1875 INCHES MINIMUM AND 2.1885 INCHES MAXIMUM IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-117-0772
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17169-10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: TAPERED ROLLERS, BANDED OD
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 2.1875 INCHES MINIMUM AND 2.1885 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.1971 INCHES MINIMUM AND 1.1979 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.6245 INCHES MINIMUM AND 0.6255 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORTAPERED ROLLERS, BANDED OD
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER2.1875 INCHES MINIMUM AND 2.1885 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
BORE DIAMETER1.1971 INCHES MINIMUM AND 1.1979 INCHES MAXIMUM IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
T119Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS17169-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17169-10?
MS17169-10 is a BEARING,ROLLER,THRUST.
What parts can replace MS17169-10?
There is 1 known substitute for MS17169-10: T119. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17169-10?
MS17169-10 is cataloged in the U.S. Government catalog under NSN 3110-00-117-0772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17169-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.