PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17162-7
MS17162-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include diameter: 0.219 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, overall_length: 1.375 INCHES NOMINAL IN, hardness_rating: 43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL, style_designator: SLOTTED, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17162-7
NSN: 3110-00-155-9149
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.219 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
overall_length1.375 INCHES NOMINAL IN
hardness_rating43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSLOTTED
surface_treatmentPASSIVATE OVERALL
material_thickness0.048 INCHES NOMINAL IN
NSN3110-00-155-9149
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17162-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 1.0050 INCHES MINIMUM AND 1.0070 INCHES MAXIMUM IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.9668 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: FLAT RACE SURFACE, STAGGERED BALL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
BORE SMALLEST DIAMETER1.0050 INCHES MINIMUM AND 1.0070 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.9668 INCHES NOMINAL IN
SURFACE FINISHGROUND
OVERALL HEIGHT0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORFLAT RACE SURFACE, STAGGERED BALL RETAINER
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
B9Interchangeable
interchangeable cross-reference
interchangeable
4900Interchangeable
interchangeable cross-reference
interchangeable
4253252Interchangeable
interchangeable cross-reference
interchangeable
14136AInterchangeable
interchangeable cross-reference
interchangeable
3N140Interchangeable
interchangeable cross-reference
interchangeable
2682577Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17162-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17162-7?
MS17162-7 is a FILTER,RADIO FREQUENCY INTERFERE.
What parts can replace MS17162-7?
There are 26 known substitutes for MS17162-7: B9, 4900, 4253252 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17162-7?
MS17162-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9149. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17162-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026