PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17162-2
MS17162-2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The DISK,CLUTCH,VEHICULAR is a the manufacturer industrial component. Key specifications include diameter: 0.226 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN, material: STEEL COMP 410 OR STEEL COMP 420 OVERALL, overall_length: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, shear_strength: 5700 DOUBLE POUND, surface_finish: 80.0 MICROINCHES OUTSIDE DIAMETER, hardness_rating: 43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17162-2
NSN: 3110-00-155-9144
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.226 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
materialSTEEL COMP 410 OR STEEL COMP 420 OVERALL
overall_length0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
shear_strength5700 DOUBLE POUND
surface_finish80.0 MICROINCHES OUTSIDE DIAMETER
hardness_rating43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSLOTTED
surface_treatmentPASSIVATE OVERALL
material_thickness0.048 INCHES NOMINAL IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN3110-00-155-9144
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17162-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 1.3418 INCHES MINIMUM AND 1.3438 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
BORE SMALLEST DIAMETER: 0.6290 INCHES MINIMUM AND 0.6310 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER1.3418 INCHES MINIMUM AND 1.3438 INCHES MAXIMUM IN
OVERALL HEIGHT0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
BORE SMALLEST DIAMETER0.6290 INCHES MINIMUM AND 0.6310 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT RACE SURFACE, STAGGERED BALL RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MS16562-243Interchangeable
interchangeable cross-reference
interchangeable
MS171622Interchangeable
interchangeable cross-reference
interchangeable
T15793Interchangeable
interchangeable cross-reference
interchangeable
10P704Interchangeable
interchangeable cross-reference
interchangeable
374991C11Interchangeable
interchangeable cross-reference
interchangeable
W55-1 3-4INB0REInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17162-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17162-2?
MS17162-2 is a DISK,CLUTCH,VEHICULAR.
What parts can replace MS17162-2?
There are 18 known substitutes for MS17162-2: MS16562-243, MS171622, T15793 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17162-2?
MS17162-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17162-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026