PartsTable
Technical Data Sheet
Download PDF

MS17161-82 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MS17161-82: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 0.8745 INCHES MINIMUM AND 0.8755 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 2.2560 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-1779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17161-82
NSN: 3110-00-156-1779
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height0.8745 INCHES MINIMUM AND 0.8755 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter2.2560 INCHES NOMINAL IN
overall_outside_diameter3.4373 INCHES MINIMUM AND 3.4375 INCHES MAXIMUM IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1779
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17161-82 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 3.4373 INCHES MINIMUM AND 3.4375 INCHES MAXIMUM IN
•
BORE SMALLEST DIAMETER: 2.2560 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.8745 INCHES MINIMUM AND 0.8755 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER3.4373 INCHES MINIMUM AND 3.4375 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER2.2560 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
1110Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
G29Reference document
Same NSN cross-reference
Reference document — Secondary reference
A2029Reference document
Same NSN cross-reference
Reference document — Secondary reference
MAKERReference document
Same NSN cross-reference
Reference document — Secondary reference
4429Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy MS17161-82?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17161-82?
MS17161-82 is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace MS17161-82?
There are 5 known substitutes for MS17161-82: 1110, G29, A2029 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17161-82?
MS17161-82 is cataloged in the U.S. Government catalog under NSN 3110-00-156-1779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17161-82