PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17161-75
MS17161-75 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,GLASS DIELECTRIC. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 0.8750 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 2.1250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17161-75
NSN: 3110-00-156-1769
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height0.8750 INCHES NOMINAL IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter2.1250 INCHES NOMINAL IN
overall_outside_diameter3.3125 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1769
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17161-75 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.3125 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
BORE SMALLEST DIAMETER: 2.1250 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.3125 INCHES NOMINAL IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL HEIGHT0.8750 INCHES NOMINAL IN
STYLE DESIGNATORGROOVED RACE SURFACE
BORE SMALLEST DIAMETER2.1250 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
4427Interchangeable
interchangeable cross-reference
interchangeable
AN280-406Interchangeable
interchangeable cross-reference
interchangeable
P113Interchangeable
interchangeable cross-reference
interchangeable
AN6H7AInterchangeable
interchangeable cross-reference
interchangeable
BS4-1903PC12Interchangeable
interchangeable cross-reference
interchangeable
BS4-1897PC12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17161-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17161-75?
MS17161-75 is a CAPACITOR,FIXED,GLASS DIELECTRIC.
What parts can replace MS17161-75?
There are 25 known substitutes for MS17161-75: 4427, AN280-406, P113 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17161-75?
MS17161-75 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17161-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026