PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17161-62
MS17161-62 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BACKSHELL,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 0.7500 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 1.8750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1750, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17161-62
NSN: 3110-00-156-1750
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height0.7500 INCHES NOMINAL IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter1.8750 INCHES NOMINAL IN
overall_outside_diameter2.8125 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1750
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17161-62 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
BORE SMALLEST DIAMETER: 1.8750 INCHES NOMINAL IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 2.8125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
BORE SMALLEST DIAMETER1.8750 INCHES NOMINAL IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
OVERALL HEIGHT0.7500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.8125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
12BInterchangeable
interchangeable cross-reference
interchangeable
54X549Interchangeable
interchangeable cross-reference
interchangeable
N7460XInterchangeable
interchangeable cross-reference
interchangeable
331028Interchangeable
interchangeable cross-reference
interchangeable
220984Interchangeable
interchangeable cross-reference
interchangeable
1866-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17161-62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17161-62?
MS17161-62 is a BACKSHELL,ELECTRICAL CONNECTOR.
What parts can replace MS17161-62?
There are 21 known substitutes for MS17161-62: 12B, 54X549, N7460X and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17161-62?
MS17161-62 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1750. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17161-62

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026