PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17161-108
MS17161-108 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CHASSIS,ELECTRICAL-ELECTRONIC EQ. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 20.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 70.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17161-108
NSN: 3110-00-156-1900
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height20.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter70.0 MILLIMETERS NOMINAL MM
overall_outside_diameter95.0 MILLIMETERS NOMINAL MM
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1900
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17161-108 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 70.0 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
OVERALL OUTSIDE DIAMETER: 95.0 MILLIMETERS NOMINAL MM
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SMALLEST DIAMETER70.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL OUTSIDE DIAMETER95.0 MILLIMETERS NOMINAL MM
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
OVERALL HEIGHT20.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
3024335Interchangeable
interchangeable cross-reference
interchangeable
02914Interchangeable
interchangeable cross-reference
interchangeable
2914Interchangeable
interchangeable cross-reference
interchangeable
49X698Interchangeable
interchangeable cross-reference
interchangeable
GE5671-3Interchangeable
interchangeable cross-reference
interchangeable
SCC23871Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17161-108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17161-108?
MS17161-108 is a CHASSIS,ELECTRICAL-ELECTRONIC EQ.
What parts can replace MS17161-108?
There are 24 known substitutes for MS17161-108: 3024335, 02914, 2914 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17161-108?
MS17161-108 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17161-108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026