PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17133-30
MS17133-30 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL OR COPPER ALLOY OR ALUMINUM RETAINER, bore_shape: STRAIGHT, bore_diameter: 150.0 MILLIMETERS NOMINAL MM, overall_width: 56.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, special_features: OIL HOLES AND GROOVE IN OUTER RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17133-30
NSN: 3110-00-155-9057
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OR COPPER ALLOY OR ALUMINUM RETAINER
bore_shapeSTRAIGHT
bore_diameter150.0 MILLIMETERS NOMINAL MM
overall_width56.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
special_featuresOIL HOLES AND GROOVE IN OUTER RING
style_designatorDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
overall_outside_diameter225.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationRBEC NO.1
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OUTER RING
NSN3110-00-155-9057
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17133-30 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES INNER RING
•
MATERIAL: STEEL OR COPPER ALLOY OR ALUMINUM RETAINER
•
STYLE DESIGNATOR: DOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES INNER RING
MATERIALSTEEL OR COPPER ALLOY OR ALUMINUM RETAINER
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 INNER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OUTER RING
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OUTER RING
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES ROLLER
STYLE DESIGNATORDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER225.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
343-0141-000Interchangeable
interchangeable cross-reference
interchangeable
5M.3033.220.07Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
interchangeable cross-reference
interchangeable
23030Interchangeable
interchangeable cross-reference
interchangeable
SM102KInterchangeable
interchangeable cross-reference
interchangeable
SG280012EAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17133-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17133-30?
MS17133-30 is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace MS17133-30?
There are 16 known substitutes for MS17133-30: 343-0141-000, 5M.3033.220.07, FFS92 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17133-30?
MS17133-30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17133-30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026