PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17131-52
MS17131-52 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 2.0006 INCHES MINIMUM AND 2.0019 INCHES MAXIMUM IN, overall_width: 1.7400 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RING, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-3778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17131-52
NSN: 3110-00-902-3778
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
bore_diameter2.0006 INCHES MINIMUM AND 2.0019 INCHES MAXIMUM IN
overall_width1.7400 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter2.3750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OUTER RING
NSN3110-00-902-3778
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17131-52 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 2.0006 INCHES MINIMUM AND 2.0019 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1090 OR STEEL COMP 1095 ROLLER
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER2.0006 INCHES MINIMUM AND 2.0019 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
SURFACE FINISHGROUND
OVERALL WIDTH1.7400 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4135H OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OUTER RING
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE IN OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
7038130Interchangeable
interchangeable cross-reference
interchangeable
53563Interchangeable
interchangeable cross-reference
interchangeable
MS15701-315Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17131-52?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17131-52?
MS17131-52 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS17131-52?
There are 3 known substitutes for MS17131-52: 7038130, 53563, MS15701-315. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17131-52?
MS17131-52 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-3778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17131-52

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026