PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17131-2
MS17131-2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 4135H OR STEEL COMP 303SE OUTER RING, bore_diameter: 0.1566 INCHES MINIMUM AND 0.1576 INCHES MAXIMUM IN, overall_width: 0.2120 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-887-1494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17131-2
NSN: 3110-00-887-1494
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 4135H OR STEEL COMP 303SE OUTER RING
bore_diameter0.1566 INCHES MINIMUM AND 0.1576 INCHES MAXIMUM IN
overall_width0.2120 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.2812 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OUTER RING
NSN3110-00-887-1494
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17131-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.1566 INCHES MINIMUM AND 0.1576 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1095 OR STEEL COMP 1090 ROLLER
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE ROLLER
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH0.2120 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
BORE DIAMETER0.1566 INCHES MINIMUM AND 0.1576 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1095 OR STEEL COMP 1090 ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE ROLLER
MATERIALSTEEL COMP 1010 OR STEEL COMP 4135H OR STEEL COMP 303SE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OUTER RING
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL OUTSIDE DIAMETER0.2812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
8130869Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
ASTM F 2162Interchangeable
interchangeable cross-reference
interchangeable
3110PL1161603Interchangeable
interchangeable cross-reference
interchangeable
B107X0HInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17131-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17131-2?
MS17131-2 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS17131-2?
There are 31 known substitutes for MS17131-2: 8130869, MS17131, A28229 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17131-2?
MS17131-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-887-1494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17131-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026